Searching for Cisco 1231 Wpa2 Support information? Find all needed info by using official links provided below.
https://community.cisco.com/t5/wireless-security-and-network/wpa2-on-1231-vs-1240/td-p/1001790
I'm having a problem configuring WPA2 on a Cisco 1231 Access Point, where I see a command which I cannot do on this one, which I could do on 1240 AP's. On the 1240 I've the following config of the SSID: vlan 60 authentication open eap eap_methods authentication key-management wpa version 2 …
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/67134-wpa2-config.html
Jan 21, 2008 · Note: The Aironet 1200 radio module with the part number AIR-RM20A does not support WPA 2. Aironet 802.11a/b/g Client Adapters with firmware version 2.5. Note: Cisco Aironet 350 series products do not support WPA 2 because their radios lack AES support. Note: Cisco Aironet 1400 Series Wireless Bridges do not support WPA 2 or AES.
https://community.cisco.com/t5/wireless-security-and-network/wireless-ap-questions-on-wpa2/td-p/2548239
for 1231 it may probably depend on the software image you use. although the AP supports WPA2, make sure that you use an image that supports that as well. older images may or may not support it. I never tried this AP in enterprise but it's very old comparing to the …
https://community.cisco.com/t5/wireless-security-and-network/configuring-wpa2-in-air-ap1231g-e-k9/td-p/1533137
Hi , I would like to implement WPA2 in my APs but I'm not sure if I'm doing it right. What I've done is add the following commands: dot11 ssid XXXX vlan 11 authentication open authentication key-management wpa wpa-psk ascii 7 XXXXXXXXXXXXXXXXX
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/68583-FAQ-Wireless-Security.html
Jun 21, 2009 · How is WPA 2 different from WPA? ... The Cisco AP does not support local MAC authentication and Wi-Fi Protected Access Pre-share Key (WPA-PSK) in the same Service Set Identifier (SSID). ... We currently have three Cisco 1231 Wireless APs setup with Ciphers 128-bit WEP encryption for our data VLAN. We do not broadcast the SSID. We do not have a ...
https://community.cisco.com/t5/wireless-security-and-network/how-to-configure-wpa2-security-on-air-ap1231g-a-k9/td-p/2412033
I have some Access Point model AIR-AP1231G-A-K9 with system software version 12.3(8)JED and bootloader version 12.3(2)JA4, I need change the security to WPA version 2, but this model only have WPA version 1 with TKIP, Could you tell me if I can do an Operative System Upgrade that support WPA version 2, or what can I do to configure this option on my access point.
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1100-series/44721-WPAOverview.html
Oct 19, 2009 · Wi-Fi Protected Access 2 (WPA 2) Configuration ; Technical Support & Documentation - Cisco Systems; Was this Document Helpful? Yes No Feedback. Contact Cisco. Open a Support Case (Requires a Cisco Service Contract) Related Cisco Community …
How to find Cisco 1231 Wpa2 Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
