Searching for Router Wol Support information? Find all needed info by using official links provided below.
http://www.wolcenter.com/faq.php
If a router don't support Wake on LAN natively a few workaround may be usable: if the router supports it, forward the UDP packet to the broadcast address if your router supports static DHCP, define a static DHCP entry for the PC wake up and try to forward to the choosen IP address.
https://www.linksys.com/us/support-article?articleNum=139830
• all routers between the remote location and computer required to WoL must allow IP directed broadcasts and support IPv4 NOTE: For information if your operating system supports WoL , you may contact the manufacturer’s technical support.
https://www.tp-link.com/us/support/faq/2156/
In the diagram below, PC A is connected to the internet via the router. It is required that PC B can wake up PC A by sending a Magic Packet via the internet. Configuration Scheme; Before configuring WOL, you should do the following preparation: Make sure that the motherboard of PC A supports WOL.
https://www.dell.com/support/article/us/en/04/sln292761/wake-on-lan-wol-troubleshooting-best-practices
What is Wake-On-LAN (WOL) Wake-On-LAN is an Ethernet networking standard that allows a properly configured network computer to be turned on or awakened by a network message. Wake-on-LAN (sometimes abbreviated WoL) is an industry standard protocol for waking computers up from a very low power mode remotely.
https://www.tp-link.com/us/support/faq/922/
It is also possible to initiate the message from another network by using subnet directed broadcasts or a WOL gateway service. Hardware requirements. The mainboard and wired network adapter must support Wake-on-LAN feature. Software requirements. Wake On Lan Gui, Lan Helper, Magic Packet Utility, NetWaker for Windows.
https://www.howtogeek.com/70374/how-to-geek-explains-what-is-wake-on-lan-and-how-do-i-enable-it/
Jul 28, 2017 · Support for Wake-on-LAN is pretty universal nowadays, even when it’s not advertised as a feature, so if you have a computer built in the past decade or so, you’re covered. For those of you who build your own rigs, take care when buying an Ethernet card.
https://www.asus.com/support/faq/1009775/
ASUS and our third party partners use cookies (cookies are small text files placed on your products to personalize your user experience on ASUS products and services) and similar technologies such as web beacons to provide our products and services to you.
https://community.cisco.com/t5/other-network-architecture/wake-on-lan-feature-how-to-enable/td-p/512201
Re: Wake On Lan Feature - How to enable?? To forward the magic packet across a router, you will have to use an ip helper-address to the directed broadcast address of the target LAN. For example, if your client is on the LAN 192.168.42.0/24, then go to the LAN where the magic packet is being generated, and configure ip helper-address 192.168.42 ...
How to find Router Wol Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
