Qla2340 Npiv Support

Searching for Qla2340 Npiv Support information? Find all needed info by using official links provided below.


NPIV Support With QLogic Switches - Salesforce.com

    http://qlogic.force.com/SupportCenter/Customer_support_main?id=kA0800000000CkJCAU
    Cavium's QLogic SANbox 3800, 5000 and 9000 series Fibre Channel switches with firmware versions 6.8.0.03 or above support NPIV. NPIV support does not require a license key; NPIV support cannot be disabled. v7.x firmware has a 126 NPIV device limit. v8.x firmware has a 255 NPIV device limit.

Configuring NPIV support

    https://www.ibm.com/support/knowledgecenter/en/STXN8P/com.ibm.storage.ssic.help.doc/f2c_vss_vmware_config_npiv.html
    NPIV is completely transparent to storage arrays, so no specific support is required. NPIV can be used only with raw device mapping (RDM) disks. VMFS disks do not support NPIV. To implement NPIV, the physical HBAs port WWN on an ESX Server host must have …

QLogic Driver Download - Fibre Channel Adapters - QLA2340 ...

    http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByProduct.aspx?ProductCategory=39&Product=253&Os=85
    Support Files: SANsurfer Install Wizard for Windows (x86/x64/IA64) 1.0.34 build 9: Installs the appropriate Windows driver based on the hardware platform. Includes the 9.1.4.10 SCSI and 9.1.7.18 STOR miniport drivers.

Qlogic Single Port Optical Fiber Channel Adapter QLA2340

    https://www.disctech.com/QLOGIC-QLA2340-Fiber-Fibre-Channel-Adapters
    Qlogic Single Port Optical Fiber Channel Adapter PCI-X QLA2340 - New Pull. Designed and deployed by major server and storage OEMs, the QLogic SANblade QLA2340 and QLA2340L host bus adapters (HBAs) offer the ultimate in performance: 2-Gbps Fibre Channel combined with 64-bit, 133-MHz PCI-X. Eliminating traditional host bottlenecks that impede the high performance of 2-Gbps Fibre Channel, …

N-Port Identifier Virtualization (NPIV) and N-Port ...

    https://www.cisco.com/c/en/us/support/docs/storage-networking/mds-9000-series-multilayer-switches/200127-N-Port-Identifier-Virtualization-NPIV.html
    Sep 08, 2015 · The purpose of this document is to describe the differences between N-Port Identifier Virtualization (NPIV) and N-Port. Virtualization (NPV) and show their datacenter platform support. N-Port ID Virtualization (NPIV) NPIV allows a Fibre Channel host connection or N-Port to be assigned multiple N-Port IDs or Fibre Channel IDs (FCID) over a ...

IBM V3.1.0 - Supported Hardware List, Device Driver and ...

    https://www.ibm.com/support/docview.wss?uid=ssg1S1002724
    Whilst IBM recommends these levels based upon the most recent testing, the following levels were tested against previous versions of SVC and IBM will support the use of these levels with SVC V3.1.0. V2.1.0 - Supported Hardware List, Device Driver and Firmware Levels for SAN Volume Controller

Welcome to Support! - Salesforce.com

    https://qlogic.secure.force.com/SupportCenter/Customer_support_main
    By default, the supported SNMP MIBs for the QLogic FC switches do not include throughput data in MB/sec. As a workaround, use a SNMPget command to a particular OID defined in the supported MIBs done at regular intervals (1/sec), calculate the difference, then average it …

QLogic Driver Download - Fibre Channel Adapters - Windows ...

    http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByOs.aspx?ProductCategory=39&OsCategory=1&Os=194&OsCategoryName=Windows&ProductCategoryName=Fibre%20Channel%20Adapters&OSName=Windows%20Server%202012%20R2%20(x64)
    Adapter Software Installer for Windows: 3.2.6.0: Note: For newer OS revisions, use the inbox driver provided by the OS vendor. The Adapter Software Installer is a one-step program that allows you to install all adapter software and out-of-box drivers, including both Ethernet and Storage drivers.

NPIV WWN not visible by Storage Device Brocade Fibre ...

    http://community.broadcom.com/viewthread?MID=693929
    Dec 20, 2016 · We use FCoE via Cisco Nexus, so there are visible as NPIV. We allready have two Nexus in each Fabric with Blade Gen9 using FCoE that are working fine. Those new server are connected with a new Nexus with a more recent OS, but as we see the WWN in the SAN I …

IBM V7.1.x Supported Hardware List, Device Driver ...

    http://www-01.ibm.com/support/docview.wss?uid=ssg1S1004366
    The documents titled Supported Hardware List and Recommended Software Levels provide the operating systems, Host adapters, SAN fabric elements, RAID controllers and selected other hardware that have been tested or qualified by IBM. This page combines the previously separate Software and Hardware support matrices. For operating systems, we show the latest tested release levels and service packs.



How to find Qla2340 Npiv Support information?

Follow the instuctions below:

  • Choose an official link provided above.
  • Click on it.
  • Find company email address & contact them via email
  • Find company phone & make a call.
  • Find company address & visit their office.

Related Companies Support