Searching for Ancon Brickwork Support Angle information? Find all needed info by using official links provided below.
https://www.ancon.co.uk/products/masonry-support
Ancon is certified to undertake welded fabrication work to Execution Class 2 which covers the vast majority of building applications and is the default class when unspecified. Bracket Angle Support. AnconOptima and Ancon MDC Systems create a continuous length of angle to support the outer leaf of masonry.
https://www.ancon.co.uk/products/masonry-support/continuous-angle-support/
Ancon CFA Continuous Angle Support System - Ancon CFA systems are tailored to suit each individual project, based on cavity size at the support and the load to be carried. The continuous angle support system is designed to carry over 8 metres of brickwork, and to accommodate various cavity widths. Related Links. Contact Ancon; CAD Drawings
https://www.ancon.co.uk/products/masonry-support/bespoke-bracket-angle-support/
Modular Brick-Faced Units. Ancon MDC systems can be designed and manufactured to support modular factory made brick-faced units, where brick slips are adhered to either steelwork or precast concrete. The units are simply bolted to the underside of the prefixed support angle.
https://www.ancon.com.au/products/masonry-support
Ancon triumphs in national Think Brick Awards 07 Oct 2019. High-performance masonry support and fixing systems from Ancon have helped three of Australia’s most iconic new buildings to success in the country’s prestigious 2019 Think Brick Awards.Location: 98 Kurrajong Avenue, Mount Druitt, NSW 2770, Sydney
https://www.ribaproductselector.com/Product.aspx?ci=302&pr=Ancon-Masonry-SupportAnconMDCBracketAngleMasonrySupportSystem
Brick soffits can be created by bolting a Nexus brick faced steel unit (by Ibstock Kevington) to the underside of the MDC angle. Fixing to concrete: Ancon masonry support systems are generally fixed to either Ancon 28/15, 30/20 or 38/17 channels cast into the edge of the concrete.
https://www.ancon.co.uk/products/masonry-support/non-welded-bracket-angle-support/
AnconOptima (Patent No. EP 1211364) AnconOptima is a bracket angle masonry support system. Systems comprise laser-cut brackets, two-step angles with pre-marked fixing zones and locking wedges to ensure the correct contact is achieved between the two.
https://www.ancon.co.uk/resources/cad-details/masonry-support
Continuous Angle Support Systems CFA Support (DWG - 89.1 KB) CFA/I Support (DWG - 85.6 KB) Individual Bracket Support Systems MDA Support (DWG - 86.8 KB) ... As a long standing sponsor of the Brick Awards, Ancon once again joins the celebrations to acknowledge excellence in the use of the UK’s favourite cladding material.
https://www.ancon.com.au/products/masonry-support/continuous-angle-support
Ancon will design a system with an inverted angle to suit a 30mm cavity and carry 6.0kN/metre run of masonry (unfactored). References. CFA Standard system CFA/I Inverted system with the support angle at the top. Some applications demand that the support leg is below the soffit of the structure.Location: 98 Kurrajong Avenue, Mount Druitt, NSW 2770, Sydney
https://www.ancon.com.au/products/masonry-support/bracket-angle-support
Ancon MDC Systems are tailored to suit each contract, and are based on the cavity size at the support and the masonry load to be carried. Ancon will design an economical configuration of channel, bracket and angle. Specification is as follows: MDC/type/cavity/masonry load. e.g. MDC / R / 50 / 6.6Location: 98 Kurrajong Avenue, Mount Druitt, NSW 2770, Sydney
How to find Ancon Brickwork Support Angle information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
