Searching for Stabilized Magnesia A Novel Catalyst Support Material information? Find all needed info by using official links provided below.
https://www.sciencedirect.com/science/article/pii/S0166983400823568
Stabilized magnesia: A novel catalyst (support) material. Abstract. Magnesium aluminium hydroxycarbonate compounds with the hydrotalcite structure (“Feitknecht compounds”) and molar ratios of Mg-to-Al of 5–10 have been prepared without the formation of considerable amounts of separate magnesium compounds.Cited by: 179
https://www.sciencedirect.com/science/article/abs/pii/S0166983400823568
Subsequent calcination yields magnesia-rich mixed oxides, which combine high surface areas with good stability towards heat and steam. These “stabilized magnesia” compounds have a pronounced basic character and are very active in the double-bond isomerization of 1-pentene. They may find application as solid base catalysts or as catalyst ...
https://pubs.acs.org/doi/full/10.1021/ie901166b
Oct 07, 2009 · Calcium oxide based materials are attractive regenerable absorbents for separating CO2 from hot gas streams because of their high reactivity, high CO2 capacity, and low material cost. Their high carbonation temperature makes it possible to recover and use high quality heat released during CO2 capture, which increases overall process efficiency.Cited by: 180
https://www.onlinelibrary.wiley.com/doi/abs/10.1002/fuce.201300175
A PFSA‐stabilized Pt‐catalyst supported on a novel carbon material, carbon nano networks (CNNs), was synthesized. To benchmark its performance, it was compared to a commercial catalyst, supported on an amorphous carbon support, and to a PFSA stabilized Pt catalyst supported on commercial carbon nano tubes (CNTs).Cited by: 6
https://pubs.rsc.org/en/content/articlehtml/2009/jm/b808370c
These materials include CNTs, CNFs, mesoporous carbon, conductive doped diamonds and nanodiamonds, conductive oxides (tin oxide/indium tin oxide, titanium oxide, tungsten oxide) and carbides (tungsten carbides), among which carbon materials are usually used as the primary catalyst support and other materials as the secondary support.Cited by: 645
https://www.pnnl.gov/main/publications/external/technical_reports/PNNL-16950.pdf
particularly good promoter material when added in small quantities to another support material such as alumina, zirconia, or olivine. Other promising supports were lanthana, zirconia, and titania.
https://www.researchgate.net/publication/230097629_The_preparation_and_properties_of_magnesia_catalyst_supports
The preparation of magnesia has been investigated with the object of preparing a catalyst support material that maintained high surface area after heating to high temperatures. The effect of...
https://pubs.acs.org/doi/abs/10.1021/ie901166b
Oct 07, 2009 · Calcium oxide based materials are attractive regenerable absorbents for separating CO2 from hot gas streams because of their high reactivity, high CO2 capacity, and low material cost. Their high carbonation temperature makes it possible to recover and use high quality heat released during CO2 capture, which increases overall process efficiency.Cited by: 180
https://www.researchgate.net/publication/306929970_Theoretical_exploration_of_novel_catalyst_support_materials_for_fuel_cell_applications
Theoretical exploration of novel catalyst support materials for fuel cell applications Article in Journal of Materials Chemistry A 4(39) · August 2016 with 34 Reads How we measure 'reads'
How to find Stabilized Magnesia A Novel Catalyst Support Material information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
