Searching for Smartmontools Usb Support information? Find all needed info by using official links provided below.
https://www.smartmontools.org/wiki/Supported_USB-Devices
Smartmontools USB Device Support. For a general overview of smartmontools's USB support, see USB devices and smartmontools.. The following tables list USB devices that have been successfully or unsuccessfully (below) tested with smartmontools.
https://www.smartmontools.org/ticket/327
This USB bridge does not implement the ATA pass-through SCSI commands supported by other Prolific USB bridges. It may implement another vendor-specific command. Adding this to smartmontools would require documentation from the vendor.
https://sourceforge.net/p/smartmontools/mailman/message/22033081/
> Skymaster 8632 IDE/SATA auf USB 2.0 Adapter > > Now the only device from this list, which is also featured on > smartmontools' USB-Support wikisite is: > > Digitus DA-70148-1 > > So please, if anyone has made experiences with one of the featured > devices, please add your experiences to the wikisite! > > From the devices on your list, I have ...
https://www.smartmontools.org/ticket/1221
ASMedia ASM2362 provides a vendor specific NVMe pass-through SCSI command. This should be supported by smartmontools via a new -d TYPE option (e.g. -d sntasmedia). A possible USB-Id is 0x174c:0x2362. See also the original report on smartmontools-database list.
https://sourceforge.net/p/smartmontools/mailman/smartmontools-support/thread/[email protected]/
Aug 19, 2009 · [smartmontools-support] Genesys Logic Inc USB->SATA/PATA SAT support semi-working. From: Tim Small <tim@bu...> - 2009-08-10 18:11:54. Hello, I have the following USB mass-storage device: Bus 005 Device 013: ID 05e3:0718 Genesys Logic, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level ...
https://www.smartmontools.org/ticket/242
This USB bridge does not implement any of the ATA pass-through SCSI commands supported by smartmontools. It may implement another vendor-specific command. Adding this to smartmontools is not possible without documentation from the vendor. The ATA compliance of an USB bridge does not imply that full pass-through access to all ATA commands is ...
https://sourceforge.net/p/smartmontools/mailman/message/19459703/
Jim Kleckner wrote: > The recent patches for atacb support for USB drives > with Cypress chipsets are exciting. > > Very often you are trying to deal with drives using a > USB2.0 bridge like the one from Vantec. > > Can you describe how we can tell whether smartctl > will work with some form of pass-through for a given > hardware configuration? > > How can we tell if there is a Cypress chipset ...
How to find Smartmontools Usb Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
