Nat Support Parameters Handle Via Received

Searching for Nat Support Parameters Handle Via Received information? Find all needed info by using official links provided below.


Configure Network Address Translation (NAT) Support ...

    https://www.cisco.com/c/en/us/support/docs/smb/unified-communications/cisco-small-business-spa300-series-ip-phones/smb3362-configure-network-address-translation-nat-support-parameters.html
    Dec 11, 2018 · Scroll down to the NAT Support Parameters area. Step 3. Choose Yes or No from the Handle VIA Received drop-down list. If you choose Yes the IP Phone will use the IP address when it gets any received parameters in a VIA header.

Configure NAT with STUN on SPA3102 Phone Adapters - Cisco

    https://www.cisco.com/c/en/us/support/docs/smb/unified-communications/cisco-small-business-voice-gateways-and-atas/smb3056-configure-nat-with-stun-on-spa3102-phone-adapters.html
    Dec 11, 2018 · At the Insert VIA received field, choose Yes from the drop-down list to insert the received parameter in the VIA header if the received-from IP address and sent-by IP address values differ. The default value is no.

SPA 3102 NAT support parameters - Hardware

    https://forums.whirlpool.net.au/archive/858084
    Nov 24, 2007 · what is the meaning of below parameters in spa 3102. what performance will be affected spa3102 , if if set it yes or no . (1)Handle VIA received (2) Handle VIA rport (3) Insert VIA received (4)Inser VIA rport (5) sustitute VIA address (6) send Resp to SRC port.

PAP2T-NA USA optimal settings when using NAT - VOIP Tech ...

    https://www.dslreports.com/forum/r24131299-PAP2T-NA-USA-optimal-settings-when-using-NAT
    Apr 24, 2010 · [Equipment] NAT Support Parameters for Linksys SPA-3102-NA; ... Record the port number specified by RTP Port Max. 3) Set Handle VIA received to yes. 4) Set Handle VIA …

Cisco SPA122 - Dzinga

    https://dzinga.com/file/manual/phone_manual_Cisco_SPA112_Cisco_SPA122_en.pdf
    NAT Support Parameters Handle VIA received Insert VIA received Substitute VIA Addr STUN Enable STUN server EXT RTP Port Min Linksys Key System Parameters Linksys Key System Key System Auto Discovery Force LAN Codec 0 030 PCMI_I G72€-32 G729ab none port Max Max RTP ICMP Err No UDP Checksum AVT Dynamic Payload G72€r32 Dynamic Payload

Using Third party VOIP service with ATT-Uverse internet ...

    https://forums.att.com/conversations/att-phone-features/using-third-party-voip-service-with-attuverse-internet-call-drops-after-some-time/5defeddabad5f2f606e793ae
    Feb 11, 2013 · I didn't mess with other NAT support parameters yet, which are No by default.. I have come across posts which talk about setting some of these parameters to Yes when NAT Mapping is enabled. NAT Support Parameters Handle VIA received: Handle VIA rport: ...

Small Business Support Community - Cisco Community

    http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=53158f7901da44c48fa125a92e5b24bf_Network_Address_Translation__NAT__Support_Parameters_on_PAP2.xml
    Welcome to the Small Business Support Community! Have questions with any of the Cisco Small Business? Cisco Experts and employees can help you in this support forum.

SIP Sorcery Community Forums

    http://forum.sipsorcery.com/viewtopic.php?t=1723
    Case III. If set another ATA, the PAP2, in the same LAN, exactly as case I, have line #1 registered at Smartvoip.com, and line #2 register at Sipgate.com (a 2nd Sipgate number different than the one used in Sipsorcery), then some weird things happen: line #2 would constantly try to register every 1 second!Even it is set to much longer in the line #2 setting.

Configure a network with PPPoE pass-through and NAT

    http://www.blog.creativform.com/configure-a-network-with-pppoe-pass-through-and-nat/
    Nov 25, 2015 · If the modem is handling the PPPoE connection, then the router would receive a private IP from the modem and then create another private network via NAT. This situation is a little bit complicated because there would be two layers of private networks in this instance and is recognized by many devices as “Double NAT”.

Cisco SPA112 FXS - Google Groups

    https://groups.google.com/d/topic/sipxcom-users/VZsncf-nu6Q
    Ive been playing around with the Cisco SPA112 FXS and I can get it to send t38 faxes and regular faxes via g711 with no problem. But I cannot get it to receive. ... I have the following enabled in the NAT Support Parameters on the Cisco SPA112 FXS. Handle VIA received: yes. Handle VIA rport: yes. Insert VIA received: yes.



How to find Nat Support Parameters Handle Via Received information?

Follow the instuctions below:

  • Choose an official link provided above.
  • Click on it.
  • Find company email address & contact them via email
  • Find company phone & make a call.
  • Find company address & visit their office.

Related Companies Support