Searching for Multiple Lun Support Adaptec information? Find all needed info by using official links provided below.
https://www.ibm.com/support/knowledgecenter/en/SSEQVQ_8.1.0/tshoot/t_pdg_dvcdrvr_adaptecscsi.html
The multiple LUN option must be turned on. Complete the following steps to turn on the multiple LUN options: Press the Ctrl and A keys at the same time. Select SCSI Device Configuration in the Configure/View Host Adapter Setting. Change No to Yes for Bios Multiple LUN support.
https://storage.microsemi.com/en-us/support/scsi/2940/aha-2940au/use_prod/scsi_user_guide.htm?nc=/en-us/support/scsi/2940/aha-2940au/use_prod/scsi_user_guide.htm
Boot LUN Number: If the boot device has multiple LUNs ( Logical Unit Numbers) and Multiple LUN support is enabled, this option allows the user to specify which LUN to boot from your boot device. The default is 0. SCSI Device Configuration This area define configuration settings that are specific only to the SCSI ID of the device in question.
https://www.ibm.com/support/knowledgecenter/en/SSGSG7_7.1.0/com.ibm.itsm.tshoot.doc/t_pdg_dvcdrvr_adaptecscsi.html
Setting the multiple LUN options to "on" for Adaptec SCSI and Qlogic Fibre-Channel HBA BIOS settings on Linux By default, Adaptec SCSI adapters set the multiple logical unit number (LUN) option to "off" in their BIOS, which makes the SCSI adapter driver unable to probe a SCSI unit with multi-LUN properly.
https://storage.microsemi.com/en-us/support/_eol/scsi_sw/ez-scsi_4.01/install_sw/ezscsi_401_readme.htm
Adaptec EZ-SCSI applications (e.g. SCSI Explorer) do not support multiple LUNs. If you have a multi-LUN device, you will only see LUN #0. If you are playing an Audio CD, and you try to access the CD-ROM drive through an ASPI application (e.g. SCSI Explorer), the audio may stop playing in order to service your I/O request.
https://ask.adaptec.com/app/answers/detail/a_id/15055
BIOS Multiple LUN Support can be changed back to "Yes" if needed. For the SCSI ID of the device in question, set "Enable Disconnection" to "No". For the SCSI ID of the device in question, set "Send Start Unit Command" to "No". Press Esc twice to exit, save the changes. ... Adaptec SCSI Card 29320LPE
https://communities.vmware.com/thread/104301
Sep 25, 2007 · Regarding to this I have 2 questions. Can I run a vm on ESX 3.02 with my backup software and use a physical to the ESX server connected SCSI device, which needs multiple lun support ? I read, that only adaptec scsi cards are supported for scsi pass-through. Are all adaptec cards supported ? Thanks a lot. Bye
https://adaptec.com/en-us/support/scsi/2940/aha-2940w/install_sw/issues_for_netware.htm?nc=/en-us/support/scsi/2940/aha-2940w/install_sw/issues_for_netware.htm
There is a known problem with some hard drives that are less than or equal to 1 GB. If these drives were previously formatted using the Adaptec 7800 Family Manager Set v2.1x driver for Novell NetWare, and are now being upgraded to the 7800 Family Manager Set driver, the user may have problems in finding the device during initialization.
How to find Multiple Lun Support Adaptec information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
