Searching for Ecos Jffs2 Support information? Find all needed info by using official links provided below.
https://doc.ecoscentric.com/ref/fs-jffs2-usage.html
To increase the size, you must change JFFS2's view of the machine page size - the eCos JFFS2 port's view of the page size does not actually need to reflect any real underlying page size of the memory management system, and the notion of the page size is a hangover from the Linux origins of JFFS2 which would be too disruptive to remove.
http://sourceware.org/jffs2/jffs2-html/node3.html
The JFFS2 code was intended to be portable, in particular to eCos, Red Hat's embedded operating system targetted at consumer devices. For this reason, JFFS2 is released under a dual licence -- both under GPL and the MPL-style ``Red Hat eCos Public License'', to be compatible with the licence of the remainder of the eCos source.
https://en.wikipedia.org/wiki/JFFS2
JFFS2 has been included into the Linux kernel since September 23, 2001, when it was merged into the Linux kernel mainline as part of the kernel version 2.4.10 release. JFFS2 is also available for a few bootloaders, like Das U-Boot, Open Firmware, the eCos RTOS, the RTEMS RTOS, and the RedBoot. Most prominent usage of the JFFS2 comes from OpenWrt.Introduced: September 23, 2001 with Linux 2.4.10
http://sourceware.org/jffs2/
What operating systems does JFFS2 work under? JFFS2 works in Linux (v2.4 and later) and eCos. Where can I get it? JFFS2 has been included in the official Linux kernel since the 2.4.10 release. The stable branch, supporting only NOR flash devices, is included in the current 2.4 series of kernels.
http://www.ecos.sourceware.org/redboot/
For all the latest news about RedBoot and eCos, please refer to the eCos home page. Hardware support and RedBoot binaries. As RedBoot is based on the eCos operating system, it is easy to port RedBoot to any system to which eCos has been ported. A full list of eCos supported hardware is available, including details of RedBoot support.
http://ecos.sourceware.org/
eCos deployed on Chibis-M microsatellite. eCos has been deployed within the attitude and stabilization control system of the Chibis-M microsatellite. This application runs on an LPC2294 (ARM7) processor and uses many eCos components including CAN, I2C, SPI, ADC, watchdog, JFFS2 filesystem, uSTL and the object loader. May 9, 2012
https://www.ecoscentric.com/ecos/ecospro_tab.shtml
NAND flash drivers are required to support the Yaffs NAND file system. USB host controller, MMC/SD or IDE drivers are a prerequisite for FATfs support. Driver support indicated in above table is either for the specific processor or discrete hardware on the specific evaluation board.
http://sourceware-org.1504.n7.nabble.com/JFFS2-on-eCos-td200332.html
JFFS2 on eCos. Is anyone still interested in JFFS2 on eCos? I've just committed a bunch of improvements to mount time and memory usage, and I'm hoping …
https://wiki.osdev.org/JFFS2
JFFS2 has been included into the Linux kernel since September 23, 2001, when it was merged into the Linux kernel mainline as part of the kernel version 2.4.10 release. JFFS2 is also available for a few bootloaders, like Das U-Boot, Open Firmware, the eCos RTOS and the RedBoot. Most prominent usage of the JFFS2 comes from OpenWrt.
https://www.ecoscentric.com/ecos/ecospro.shtml
eCosPro Developer's Kits combine the feature set, stability and quality of support required for commercial embedded application development with eCos.. All the necessary elements for eCos application development are included in the Developer's Kit: Eclipse-based IDE, GNU compiler toolset and utilities, GUI based eCos configuration tool, RedBoot debug and bootstrap firmware, and the eCos …
How to find Ecos Jffs2 Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
