Searching for Cisco Radius Server Attribute 6 Support Multiple information? Find all needed info by using official links provided below.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/security/m1/sec-m1-cr-book/sec-cr-r1.html
Router(config)# radius-server attribute 6 on-for-login-auth. The following example shows that multiple Service-Type values are to be supported for each RADIUS profile: Router(config)# radius-server attribute 6 support-multiple. The following example shows that Service-Type values are to …
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_radatt/configuration/xe-16/sec-usr-radatt-xe-16-book/sec-rad-ov-ietf-attr.html
Jan 21, 2018 · Supported RADIUS IETF Attributes. Table 1 lists Cisco-supported IETF RADIUS attributes and the Cisco IOS release in which they are implemented. In cases where the attribute has a security server-specific format, the format is specified. Refer to Table 2 for a description of each listed attribute.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-6/configuration_guide/sec/b_166_sec_9300_cg/configuring_radius.html
Sep 18, 2019 · The RADIUS host is normally a multiuser system running RADIUS server software from Cisco (Cisco Secure Access Control Server Version 3.0), Livingston, Merit, Microsoft, or another software provider. ... allow vendors to support their own extended attributes not suitable for general use. The Cisco RADIUS implementation supports one vendor ...
https://community.cisco.com/t5/security-blogs/ise-switch-configuration/ba-p/3659619
radius-server attribute 6 support-multiple <- Supports multiple Service-Type values for each RADIUS profile radius-server attribute 8 include-in-access-req <- This is to send the IP address of a user to the RADIUS server in the access request. radius-server attribute 25 access-request include <- This is to include the class attribute in the access request which specifies the authorization action
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_radatt/configuration/xe-3s/sec-usr-radatt-xe-3s-book/sec-rad-attr-v-scng.html
Jan 21, 2018 · This command can be used multiple times to add attributes to an accept or reject list. ... group server radius radius-sg server 10.1.1.1 accounting reject tnl-x-endpoint ! radius-server host 10.1.1.1 key mykey1 radius-server attribute list tnl-x-endpoint attribute 66-67 ... Access to most tools on the Cisco Support website requires a Cisco.com ...
https://community.cisco.com/t5/switching/do-the-cisco-2950-or-2960-support-multiple-radius-servers/td-p/1167085
Do the Cisco 2950 or 2960 support multiple radius servers? In case one radius server is down, I would like to have the switch try another radius server. I tried this: aaa new-model aaa authentication dot1x default group radius aaa authorization
https://community.cisco.com/t5/policy-and-access/cisco-avpair-multiple-attributes-in-a-string/td-p/2360817
Dec 28, 2013 · Hi, It looks as if the radius dictionary for the cisco-av-pair should support multiple attributes, there is even an example on how to acheive this in the guide (a little dated ACS 4.0).
How to find Cisco Radius Server Attribute 6 Support Multiple information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
