Searching for Asa Pptp Support information? Find all needed info by using official links provided below.
https://www.networkstraining.com/allowing-microsoft-pptp-through-cisco-asa/
Allowing Microsoft PPTP through Cisco ASA (PPTP Passthrough) The Microsoft Point to Point Tunneling Protocol (PPTP) is used to create a Virtual Private Network (VPN) between a PPTP client and server. It is used for remote access from roaming users to connect back to their corporate network over the Internet.
https://www.petenetlive.com/KB/Article/0000009
KB ID 0000009. Problem. You cannot open a Microsoft client VPN tunnel with a cisco PIX or ASA in front of you on the network.. Solution. You need the following open (outbound) TCP port 1723 (thats pptp); Protocol 47 – note thats a PROTOCOL and NOT a PORTAllow PPTP Client through the ASA via Command Line. 1. Connect to the ASA then add PPTP inspection to the default inspection map.
https://www.networkstraining.com/cisco-asa-ikev1-and-ikev2-support-for-ipsec/
Cisco ASA introduced support for IPSEC IKEv2 in software version 8.4(1) and later. In this ASA version, IKEv2 was added to support IPsec IKEv2 connections for AnyConnect and LAN-to-LAN VPN implementations. Of course, legacy IKEv1 is still supported and is widely used in almost all VPN configurations up to now.
https://serverfault.com/questions/132199/pptp-pass-through-on-cisco-asa-5505-8-2
There are at most three things required to get PPTP working through an ASA. If server is behind ASA. Configure necessary NAT/PAT if using NAT/PAT (Optional but usually required) ACL permit TCP/1723 to server/IP (whether real, mapped, or interface depends on ASA version) Enable PPTP inspection Explicit ACL permit for GRE is not necessary
https://www.petenetlive.com/KB/Article/0000571
When Cisco released version 7 of the operating system for PIX/ASA they dropped support for the firewall acting as a PPTP VPN device. Note: If you want to use PPTP you can still terminate PPTP VPNs on a Windows server, if you enable PPTP and GRE Passthrough on the ASA. But if you want to use the native Windows VPN client you can still use L2TP over IPSEC.
https://www.cisco.com/c/en/us/support/docs/ip/point-to-point-tunneling-protocol-pptp/18761-pptp-faq.html
Mar 24, 2009 · This document addresses frequently asked questions about Point-to-Point Tunnel Protocol (PPTP). ... PIX versions 6.3 and later support PPTP pass through or PPTP over PAT using the PPTP fixup feature. This feature allows PPTP traffic to traverse the PIX when configured for PAT. The PIX performs stateful PPTP packet inspection in the process.
https://www.cisco.com/c/en/us/support/docs/ip/point-to-point-tunneling-protocol-pptp/12483-pptp-pat.html
Oct 19, 2006 · PPTP was added in Cisco IOS® Software Release 12.1(4)T. For more information, refer to the NAT - Support for PPTP in an Overload (Port Address Translation) Configuration section in the Cisco IOS Software 12.1 T Early Deployment Release Series. Prerequisites Requirements. There are no specific requirements for this document. Components Used
https://www.speaknetworks.com/pptp-vs-l2tpipsec-vs-sstp-vs-ikev2-vs-openvpn/
L2TP/IPSec is supported natively on many consumer and business grade firewalls like Cisco ASA. In that case you don’t have to deal with the issue. I would recommend using L2TP VPN for any environment. SSTP (Secure Socket Tunneling Protocol)
How to find Asa Pptp Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
