Searching for Ancon Brickwork Support System information? Find all needed info by using official links provided below.
https://www.ancon.co.uk/products/masonry-support/modular-brick-faced-units
Ancon MDC systems can be designed and manufactured to support modular factory made brick-faced units, where brick slips are adhered to either steelwork or precast concrete. The units are simply bolted to the underside of the prefixed support angle.
https://www.ancon.com.au/products/masonry-support
The Ancon CFA System is tailored to suit project specific conditions, based on the cavity size at the support and the load to be carried. Ancon will design the most economical system. For many applications, particularly where large cavities are involved, the Ancon MDC System may prove to be a more economical solution. Building Information Modelling. Ancon supports the BIM system and …Location: 98 Kurrajong Avenue, Mount Druitt, NSW 2770, Sydney
https://www.ribaproductselector.com/Product.aspx?ci=302&pr=Ancon-Masonry-SupportAnconMDCBracketAngleMasonrySupportSystem
Ancon support systems can be fixed to rolled hollow steel sections using Ancon Steelgrip fixings, designed for use where fixing is only available from one side. Setting out: Ancon can provide drawings showing the location of fixings (cast-in channels for concrete frames, bolt positions for steel frames).
https://www.ancon.com.au/downloads/1968/Masonry_Support__Windposts___Lintels.pdf
Ancon MDC Bracket Angle Support Systems can carry over 8 metres of brickwork and accommodate any width of cavity from 40mm in its standard form.
https://www.ancon.co.uk/products/masonry-support/continuous-angle-support/
Ancon CFA Systems are suitable for applications where cavities are small or there is a requirement for the cavity to be closed at the support position. The angles are cold formed and will normally be supplied in lengths of up to 2 metres. These systems can carry over 8 metres of brickwork and accommodate various cavity widths.
https://www.ancon.co.uk/whats-new/anconoptima-standard-masonry-support-system
Ancon has designed the standard AnconOptima system to be more adjustable and considerably faster to install than traditional bespoke systems with welded brackets. AnconOptima comprises short lengths of angle and a range of interchangeable brackets to easily accommodate variations in the line of the structural frame.
https://www.ancon.co.uk/products/masonry-support/non-welded-bracket-angle-support/
AnconOptima Masonry Support System - A standard support system comprising a two-step angle with pre-marked fixing zones, and a range of interchangeable brackets to …
https://www.ancon.co.uk/products/masonry-support/bespoke-bracket-angle-support/
Ancon MDC Bracket Angle Support Systems can carry over 8 metres of brickwork and accommodate any width of cavity from 50mm in its standard form. The brackets are welded to the angle and the material content of both components is optimised to ensure the most economic solution is designed.
Products include wall ties, masonry support and tension bars. Ancon manufactures stainless steel fixings for the building and construction industry. Products include wall ties, masonry support and tension bars. ... From the core to the cladding, Ancon fixing systems support ambitious multi-storey office construction projects . Offices.
How to find Ancon Brickwork Support System information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.
