Searching for 150mm Post Support information? Find all needed info by using official links provided below.
Post support is a kind of post anchor which give the post necessary protection against the attack of termites and moisture. It provides a quick and affordable method of fastening timber post to the concrete surface. Additionally, the zinc plating makes means it is corrosion resistant so that it can be used for a very long time and makes your cost effective.
Hot Dipped Galvanised, 4.00mm Steel Saddle – 32mm Shaft, 2.00mm Thick Post Shoe. VUETRADE full stirrup post supports are suitable for bolting onto and setting into concrete. With the largest range of post anchors, we have leg sizes ranging from 75mm – 600mm and saddle sizes to suit timber posts from 90mm up to 150mm square.
Convenient and fully adjustable, hot dipped galvanised anchors for post sizes of common or uncommon sizes from 90 x 90mm to 150 x 150mm. No checking of the post is required. INSTALLATION: Fix the anchor to the post with 4/50 x 10mm galvanised coach screws. Fix to the floor, footing or slab with suitable connectors. Description:
The post supports are made from 8mm thick steel and are fully galvanised. Our heavy duty blade post supports will suit posts from 150mm width upwards. It has 12mm fixing holes for the post and 16mm holes to allow fixings into concrete. Height to the bottom of the post from ground is approximately 150mm. Heavy duty blade post supports are ...
gal post supports - hollow stems - centre pin Centre pin Hollow stem, centre pin and plate for bolting onto concrete. The centre pin is designed to go up the centre of the post for non-visible support.
Stainless Steel Adjustable post base 150mm high, post size 150mm x 150mm SSB1C2 £ 69.00 – £ 78.95 Excluding VAT Please state if kit SSSA or SSSB required (determined if the threaded bar will interfere in using a threaded bar through the post).
Designed for versatility and cost effectiveness, the ABW range is a retrofit adjustable post base with a 25mm stand off for the post to help prevent your timber post from sitting in a constant state of moisture which will induce decay to the timber post. A - 150mm : B - 150mm : Base - 2.5mm Thick : Strap 2mm SEE BELOW FOR RELATED PRODUCTS.
Jun 11, 2019 · Bolt Down Anchor (150mm x 150mm) This product is designed to provide a secure fixing for fence posts above ground, ideal for hard surfaces such as concrete or rock. Using our Bolt Down Anchors provide timber posts a protective base from insect, fungal and water damage.
Green Post 150mm x 150mm £ 32.83 – £ 39.40 Inc. VAT. Green Post 150x150mm Used to support fences. Treated to UC4. Douglas fir/Larch/Pine-type of wood varies based on the supplier. ... Timberstore Ltd Pyebush Lane Beaconsfield HP9 2RX Company registration number 09285446 VAT no. 200 2787 47
Jan 11, 2019 · Bolt Down Anchor (125mm x 125mm) Made from heavy gauge steel, finished with a heavy duty protective coating. The post support holds the timber fence posts above the ground, protecting the timber post base from insect, fungal and water damage. The twin bolt grip ensures an easy, secure and long lasting fix for the varying widths of timber.
How to find 150mm Post Support information?
Follow the instuctions below:
- Choose an official link provided above.
- Click on it.
- Find company email address & contact them via email
- Find company phone & make a call.
- Find company address & visit their office.